Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
Custom Drilling Corner Plate
Description
Custom drilling corner plate
・Materials
| Type | Hole Machining | [ M ]Material | [ S ]Surface Treatment |
| IKC | FB (Without Hole) D (Through Holes) K (Through Holes and Dowel Holes) |
Cast Iron Class No.35 | Primer Coating (Gray) |
| BIKC | Black Oxide | ||
| MIKC | Electroless Nickel Plating | ||
| AIKC | Aluminum Casting Alloy 514.0 | – |
[ ! ]Cast Iron Class No.35: Surface treatment is not applied to the machined surfaces and holes.
[ ! ]A dimension is ground from the gusset side. Please note that, as shown in the photo, no surface treatment is applied on the gusset side.
[ NG ]BIKCK is not selectable.
Custom drilling corner plate
Specifications
| Part Number | – | A | – | W |
| IKCFB100 MIKCK150 |
– – |
A85 A65 |
– – |
W75 W100 |
| Part Number | Angle Plate Body | ||||
| Type | H | A 5mm Increment |
W | T | T1 |
| IKCFB BIKCFB MIKCFB AIKCFB |
100 | 50 | 75 80 100 | 15 | 14 |
| 80~100 | |||||
| 150 | 65~75 | 60 75 100 | 15 | 14 | |
| 80~100 | 75 80 100 | ||||
| 200 | 65~75 | 60 75 | 15 | 14 | |
| 85~120 | 75 80 100 | ||||
| 250 | 85~120 | 75 80 100 | 18 | 15 | |
| 300 | 90~150 | 18 | 15 | ||
| 350 | 90~150 | ||||
| 400 | 90~150 |
[ NG ]For AIKCFB, W60 is not available.
| Part Number | Angle Plate Body | Through Hole | ||||||||||||
| Type | H | A 5mm Increment |
W | T | T1 | d | B | X | F | Y | G | |||
| W=60 | W=75, 80, 100 | W=60 | W=75, 80 | W=100 | ||||||||||
| IKCD BIKCD MIKCD AIKCD |
100 | 50 | 75 80 100 | 15 | 14 | – | 11 | – | 50 | 70 | 35 | – | 45 | 40 |
| 80~100 | A-50 | |||||||||||||
| 150 | 65~75 | 60 75 100 | 15 | 14 | 9 | 11 | 40 | 50 | 70 | 35 | – | 75 | 60 | |
| 80~100 | 75 80 100 | – | – | A-50 | ||||||||||
| 200 | 65~75 | 60 75 | 15 | 14 | 9 | 11 | 40 | 50 | – | 35 | – | 110 | 70 | |
| 85~120 | 75 80 100 | – | – | 70 | 40 | A-50 | ||||||||
| 250 | 85~120 | 75 80 100 | 18 | 15 | – | 11 | – | 50 | 70 | 40 | A-55 | 140 | 90 | |
| 300 | 90~150 | 18 | 15 | 11 | 50 | 70 | 40 | A-60 | 190 | 90 | ||||
| 350 | 90~150 | 230 | 100 | |||||||||||
| 400 | 90~150 | 260 | 120 |
[ NG ]For AIKCD, W60 is not available.
[ ! ]Portions without specific dimensions are same as FB (Without Hole Type).
| Part Number | Angle Plate Body | Through Hole | Dowel Hole | |||||||||||||||
| Type | H | A 5mm Increment |
W | T | T1 | d | B | X | F | Y | G | DH7 | a | h | ||||
| W=60 | W=75, 80, 100 | W=60 | W=75, 80 | W=100 | W=60 | W=75, 80, 100 | ||||||||||||
| IKCK MIKCK AIKCK |
100 | 50 | 75 80 100 | 15 | 14 | – | 11 | – | 50 | 70 | 35 | – | 45 | 40 | – | 10 | – | 65 |
| 80~100 | A-50 | X+(F/2) | ||||||||||||||||
| 150 | 65~75 | 60 75 100 | 15 | 14 | 9 | 11 | 40 | 50 | 70 | 35 | – | 75 | 60 | 6 | 10 | A-15 | 105 | |
| 80~100 | 75 80 100 | – | – | A-50 | – | X+(F/2) | ||||||||||||
| 200 | 65~75 | 60 75 | 15 | 14 | 9 | 11 | 40 | 50 | – | 35 | – | 110 | 70 | 6 | 10 | A-15 | 145 | |
| 85~120 | 75 80 100 | – | – | 70 | 40 | A-50 | – | X+(F/2) | ||||||||||
| 250 | 85~120 | 75 80 100 | 18 | 15 | – | 11 | – | 50 | 70 | 40 | A-55 | 140 | 90 | – | 10 | X+(F/2) | 185 | |
| 300 | 90~150 | 18 | 15 | 11 | 50 | 70 | 40 | A-60 | 190 | 90 | 235 | |||||||
| 350 | 90~150 | 230 | 100 | 280 | ||||||||||||||
| 400 | 90~150 | 260 | 120 | 320 |
[ NG ]For AIKCK, W60 is not available.
[ ! ]Portions without specific dimensions are same as FB (Without Hole Type).
[ NG ]BIKCK is not selectable.
Custom drilling corner plate
Alterations
Custom drilling corner plate
Basic Information
| Strength | Standard (Cast Products) |
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
