Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
Mounting Surface Tapped Angle Plates
Description
Mounting Surface Tapped Angle Plates
・Materials
| Type | [ M ]Material | [ S ]Surface Treatment |
| IKFT | Cast Iron Class No.35 | Primer Coating (Gray) |
| IKFTB | Black Oxide | |
| IKFTM | Electroless Nickel Plating | |
| IKFTA | Aluminum Casting Alloy 514.0 | – |
Mounting Surface Tapped Angle Plates
Specifications
| Part Number | – | A | – | P | – | Y | – | G | – | M |
| IKFTB60 | – | A40 | – | P20 | – | Y25 | – | G0 | – | M4 |
| Part Number | A | 1mm Increment | Tapped Hole | Angle Plate Body | Through Hole | |||||||||
| Type | H | P | Y | G | M | W | T | T1 | d | B | X | F | ||
| IKFT (Primer Coating / Gray)IKFTB (Black Oxide) IKFTM IKFTA |
60 | 40 | 20 | 15 ~ 25 | 0 | or 9~30 | 4 | 30 | 8 | 6 | 3.5 | 20 | 15 | – |
| 100 | 40 | 20 | 15 ~ 70 | 0 | or 9~70 | 30 | 8 | 6 | 3.5 | 20 | 15 | – | ||
| 50 | 30~70 | 25 ~ 60 | 0 | or 10~65 | 5 6 8 10 12 |
100 | 15 | 14 | 11 | 70 | 35 | – | ||
| 100 | 45 | 40 | ||||||||||||
| 150 | 50 | 30 | 25~110 | 0 | or 10~115 | 50 | 15 | 8 | 9 | 30 | 35 | – | ||
| 70 | 30~70 | 100 | 14 | 11 | 70 | 40 | – | |||||||
| 75 | 30~45 | 75 | 50 | – | ||||||||||
| 100 | 30~70 | 100 | 70 | 45 | 40 | |||||||||
| 200 | 75 | 30~70 | 25~160 | 0 | or 10~165 | 75 | 15 | 14 | 11 | 50 | 40 | – | ||
| 120 | 100 | 70 | 50 | 50 | ||||||||||
| 250 | 120 | 30~70 | 30~205 | 0 | or 10~210 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | ||
| 300 | 150 | 30~255 | 0 | or 10~260 | 40 | 90 | ||||||||
| 350 | 150 | 30~305 | 0 | or 10~310 | ||||||||||
| 400 | 150 | 30~355 | 0 | or 10~360 |
[ ! ]Tap depth is Mx2. (The pilot holes for tapping go through.) [ ! ]Please specify within the range in order to prevent machining limits and interference of bolt head.
[ ! ]M+T1+10≤P≤W-M-10 (except when A=40)
[ ! ]T+M+5≤Y≤H-2M-10
[ ! ]M+5≤G≤H-Y-M-5 (except when G=0)
Mounting Surface Tapped Angle Plates
Basic Information
| Strength | Standard (Cast Products) | Hole Machining | Through Hole and Tapped Hole |
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
