Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
Standard Dimensions Aluminum Angle Plates
Description
Standard Dimensions Aluminum Angle Plates
・Materials
| Type | Hole Machining Selection | [ M ]Material |
| AIK | FB (Without Hole) D (Through Holes) K (Through Holes and Dowel Holes) |
(W=60) Aluminum Casting Alloy 356.0-T5 (W=100) Aluminum Casting Alloy 514.0 |
Standard Dimensions Aluminum Angle Plates
Specifications
| Part Number | – | A |
| AIKFB70 | – | 60 |
| Part Number | A | W | T | T1 | |
| Type | H | ||||
| Without Hole AIKFB |
60 | 60 | 60 | 10 | 10 |
| 70 | |||||
| 80 | |||||
| 90 | |||||
| 100 | 50 | 100 | 15 | 14 | |
| 60 | 60 | 10 | 10 | ||
| 100 | 100 | 15 | 14 | ||
| 150 | 70 | 100 | 15 | 14 | |
| 100 | |||||
| 200 | 120 | 100 | 15 | 14 | |
| 250 | 120 | 100 | 18 | 15 | |
| 300 | 150 | 100 | 18 | 15 | |
| 350 | |||||
| 400 |
| Part Number | A | Angle Plate Body | Through Hole | ||||||||
| Type | H | W | T | T1 | d | B | X | F | Y | G | |
| Through Holes AIKD |
60 | 60 | 60 | 10 | 10 | 6.5 | 35 | 30 | – | 25 | 25 |
| 70 | 30 | ||||||||||
| 80 | 35 | 30 | |||||||||
| 90 | 35 | ||||||||||
100 |
50 | 100 | 15 | 14 | 11 | 70 | 35 | – | 45 | 40 | |
| 60 | 60 | 10 | 10 | 6.5 | 35 | 30 | – | 40 | |||
| 100 | 100 | 15 | 14 | 11 | 70 | 45 | 40 | 45 | |||
| 150 | 70 | 100 | 15 | 14 | 11 | 70 | 40 | – | 75 | 60 | |
| 100 | 45 | 40 | |||||||||
| 200 | 120 | 100 | 15 | 14 | 11 | 70 | 50 | 50 | 110 | 70 | |
| 250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | |
| 300 | 150 | 100 | 18 | 15 | 11 | 70 | 40 | 90 | 190 | 90 | |
| 350 | 230 | 100 | |||||||||
| 400 | 260 | 120 |
[ ! ]Portions without specific dimensions are same as AIKFB (Without Hole Type).
| Part Number | A | Angle Plate Body | Through Hole | Dowel Hole | ||||||||||
| Type | H | W | T | T1 | d | B | X | F | Y | G | DH7 | a | h | |
| Through Holes and Dowel Holes AIKK |
60 | 60 | 60 | 10 | 10 | 6.5 | 35 | 30 | – | 25 | 25 | 6 | 45 | 37.5 |
| 70 | 30 | 42.5 | ||||||||||||
| 80 | 35 | 30 | 50 | |||||||||||
| 90 | 35 | 52.5 | ||||||||||||
| 100 | 50 | 100 | 15 | 14 | 11 | 70 | 35 | – | 45 | 40 | 10 | – | 65 | |
| 60 | 60 | 10 | 10 | 6.5 | 35 | 30 | – | 40 | 6 | 45 | 60 | |||
| 100 | 100 | 15 | 14 | 11 | 70 | 45 | 40 | 45 | 10 | 65 | 65 | |||
| 150 | 70 | 100 | 15 | 14 | 11 | 70 | 40 | – | 75 | 60 | 10 | 55 | 105 | |
| 100 | 45 | 40 | 65 | |||||||||||
| 200 | 120 | 100 | 15 | 14 | 11 | 70 | 50 | 50 | 110 | 70 | 10 | 75 | 145 | |
| 250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | 10 | 75 | 185 | |
| 300 | 150 | 100 | 18 | 15 | 11 | 70 | 40 | 90 | 190 | 90 | 10 | 85 | 235 | |
| 350 | 230 | 100 | 280 | |||||||||||
| 400 | 260 | 120 | 320 |
[ ! ]Portions without specific dimensions are same as AIKFB (Without Hole Type).
Standard Dimensions Aluminum Angle Plates
Basic Information
| Material | Aluminum | Strength | Standard (Cast Products) |
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
