Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
8 Series Triangle 45 Degree Aluminum Extrusion
Description
8 Series Triangle 45 Degree Aluminum Extrusion
Specifications
| Part Number | – | L |
| HFS45TR8-40 | – | 800 |
| KHFS45TR8-40 | – | 4000 |
■Configurable Length Extrusions
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment |
Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | HFS45TR8-40 | 50~4000 | 2.74 | 1012 | 12.23×104 | 38.19×104 |
[ ! ]Applicable to 6000mm depending on products.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character “K” indicate Fixed Length Extrusion.
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | KHFS45TR8-40 | 4000 | 1012 | 12.23×104 | 38.19×104 |
[ ! ]”Effective Length 4000mm” represents the extrusion with 4000mm or more effective length. (several cm)
8 Series Triangle 45 Degree Aluminum Extrusion
Alterations
Alterations are not applicable to all frames.
| Category | Alteration Names | Codes | Explanations |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW |
Add tappings on frame ends. |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | ||
| Specify How to Cut | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2)
Available only for Ｌ≦1500 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | |
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | |
| Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. |
| Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. |
| S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | |
| M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | |
| L Hole | JLP/KLP | Add holes needed for parallel joint connection. | |
| Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. |
| HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. |
8 Series Triangle 45 Degree Aluminum Extrusion
Basic Information
| Standard Extrusion Size(mm) | 40 | Extrusion Shape | Triangular | Extrusion Type | HFS (Standard) |
| Surface Finish | Clear Anodize | Surface Milled | None | Material | A6N01SS-T5 Aluminum Alloy |
| Extrusion Size – Width (A)(mm)(mm) | 40 | Extrusion Size – Thickness (T)(mm)(mm) | 40 | L Dimension Fixed, Specified | Configurable |
GB/T 6892-2006 “General industrial aluminum and aluminum alloy extruded profiles”
Industrial aluminum composite profiles refer to other aluminum extruded profiles except for architectural doors and windows, curtain walls and aluminum profiles for indoor and outdoor decoration. Except for individual products that implement their special standards, most of the implementation standards are GB/T 6892-2006 “General Use Industrial aluminum and aluminum alloy extruded profiles”, products are mainly used in aerospace, transportation, rail vehicles, electronic appliances, sports equipment, radiators, decoration, electric energy, petrochemicals, machinery manufacturing and other industrial fields.
GB/T 26014-2010 “Aluminum alloy decorative profiles for non-building use”
Non-architectural aluminum alloy decorative profiles refer to aluminum alloy hot-extruded profiles for decoration whose main purpose is to improve visual effects. If there are special requirements for the dimensional deviation of the decorative profile, it should be indicated in the contract. If there is no special requirement, it shall comply with the general requirements in GB/T 14846-2008 “Dimensional deviation of aluminum and aluminum alloy extruded profiles”. Products are mainly used in the interior and exterior decoration of vehicles, home appliance accessories, kitchen appliances, electronic appliances, interior decoration, medical equipment, instrumentation, office facilities and other fields.
