Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
5 Series 20x20 Aluminum Extrusion - Quarter Round
Description
5 Series 20×20 Aluminum Extrusion – Quarter Round
Specifications
| Part Number | – | L |
| HFSR5-2020 | – | 800 |
| KHFSR5-2020 | – | 4000 |
■Configurable Length Extrusions
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓlx | ℓly | |||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | HFSR5-2020 | 50~4000 | 0.42 | 153 | 0.57×104 | 0.57×104 |
[ ! ]Applicable to 6000mm depending on products.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character “K” indicate Fixed Length Extrusion.
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | KHFSR5-2020 | 4000 | 153 | 0.57×104 | 0.57×104 |
[ ! ]”Effective Length 4000mm” represents the extrusion with 4000mm or more effective length.
(several cm)
5 Series 20×20 Aluminum Extrusion – Quarter Round
Alterations
Alterations are not applicable to all frames.
5 Series 20×20 Aluminum Extrusion – Quarter Round
Basic Information
| Standard Extrusion Size(mm) | 20 | Extrusion Shape | Single Radius | Extrusion Type | HFS (Standard) |
| Surface Finish | Clear Anodize | Surface Milled | None | Material | A6N01SS-T5 Aluminum Alloy |
| Extrusion Size – Width (A)(mm)(mm) | 20 | Extrusion Size – Thickness (T)(mm)(mm) | 20 | L Dimension Fixed, Specified | Configurable |
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
