Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
8 Series 40x120 Aluminum Extrusion
Description
8 Series 40×120 Aluminum Extrusion
Specifications
| Part Number | – | L |
| EFS8-40120 | – | 800 |
■Configurable Length Extrusions
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment |
Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| EFS | A6NO1SS-T5 Aluminum Alloy |
Clear Anodize | EFS8-40120 | 50~4000 | 3.98 | 1474 | 29.0×104 | 223.5×104 |
| EFS | A6NO1SS-T5 Aluminum Alloy |
Black Anodize | EFSB8-40120 | 50~4000 | 3.98 | 1474 | 29.0×104 | 223.5×104 |
| NEFS | A6NO1SS-T5 Aluminum Alloy |
Clear Anodize | NEFS8-40120 | 50~4000 | 3.98 | 1474 | 29.0×104 | 223.5×104 |
8 Series 40×120 Aluminum Extrusion
Alterations
Alterations are not applicable to all frames.
8 Series 40×120 Aluminum Extrusion
| Category | Alteration Names | Codes | Explanations |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW |
Add tappings on frame ends. |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | ||
| Specify How to Cut | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2)
Available only for Ｌ≦1500 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | |
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | |
| Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. |
| Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. |
| S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | |
| M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | |
| L Hole | JLP/KLP | Add holes needed for parallel joint connection. | |
| Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. |
| HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. |
8 Series 40×120 Aluminum Extrusion
Basic Information
| Standard Extrusion Size(mm) | 40 | Extrusion Size | 40×120 | Extrusion Shape | Rectangle |
| Number of Extrusion Slots | 1 Slot-3 Slots | Number of Grooved Surfaces | Four Side Slots | Surface Milled | None |
| Extrusion Size – Width (A)(mm)(mm) | 40 | Extrusion Size – Thickness (T)(mm)(mm) | 120 | L Dimension Fixed, Specified | Configurable |
8 Series 40×120 Aluminum Extrusion
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
