Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
Aluminum Extrusion W/ Milled Surfaces
Description
Aluminum Extrusion w/ Milled Surfaces
Specifications
| Part Number | – | L |
| HFSP5-2020 | – | 300 |
■Configurable Length Extrusions
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment |
T | A |
| HFS | A6N01SS-T5 Aluminum Alloy | Anodize | HFSP5-2020 | 50~4000 | 19.2 | 20 |
| HFS | A6N01SS-T5 Aluminum Alloy | Anodize | HFSP5-2525 | 50~4000 | 24.2 | 25 |
| HFS | A6N01SS-T5 Aluminum Alloy | Anodize | HFSP5-4040 | 50~4000 | 39.2 | 40 |
Aluminum Extrusion w/ Milled Surfaces
Alterations
Alterations are not applicable to all frames.
| Category | Alteration Names | Codes | Explanations |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW |
Add tappings on frame ends. |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | ||
| Specify How to Cut | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2)
Available only for Ｌ≦1500 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | |
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. |
Aluminum Extrusion w/ Milled Surfaces
Basic Information
| Extrusion Shape | Square | Extrusion Type | HFS (Standard) | Surface Finish | Clear Anodize |
| Number of Grooved Surfaces | Four Side Slots | Surface Milled | Milled | Material | A6N01SS-T5 Aluminum Alloy |
| L Dimension Fixed, Specified | Configurable |
Experience
Our factory supply OEM service(custom service) in precision investment casting,which are also called lost wax casting, We have been committed to this technique for over 10 years . Our specialized engineer can provide you the full-service of technology advice and products improving projection,and also reduce the cost of the parts.
