Categories
Contact Us
- Phone+86 18859257178
- Emailsarui@saruimic.com
- AddressRoom 1603-3, No. 63, Xishanwei Road, Phase III, Torch High tech Zone, Xiamen
Previous
Next
8 Series 80x80 Aluminum Extrusion
Description
8 Series 80×80 Aluminum Extrusion
Specifications
| Part Number | – | L |
| HFS8-8080 | – | 800 |
■Configurable Length Extrusions
| Type | Material | Surface Treatment | Part Number | L 0.5mm Increment |
Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | HFS8-8080 | 50~4000 | 4.57 | 1691 | 129.1×104 | 129.1×104 |
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | HFSH8-8080 | 50~4000 | 7.13 | 2641 | 183×104 | 183×104 |
| HFS | A6N01SS-T5 Aluminum Alloy | Black Anodize | HFSB8-8080 | 50~4000 | 4.57 | 1691 | 129.1×104 | 129.1×104 |
[ ! ]Applicable to 6000mm depending on products.
8 Series 80×80 Aluminum Extrusion
Alterations
Alterations are not applicable to all frames.
| Category | Alteration Names | Codes | Explanations |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW |
Add tappings on frame ends. |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | ||
| Specify How to Cut | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2)
Available only for Ｌ≦1500 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | |
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | |
| Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. |
| Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. |
| S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | |
| M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | |
| L Hole | JLP/KLP | Add holes needed for parallel joint connection. | |
| Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. |
| HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. |
8 Series 80×80 Aluminum Extrusion
Basic Information
| Standard Extrusion Size(mm) | 80 | Extrusion Size | 80×80 | Extrusion Shape | Square |
| Number of Extrusion Slots | 2 Slots-2 Slots | Extrusion Type | HFS (Standard) | Number of Grooved Surfaces | Four Side Slots |
| Surface Milled | None | Material | A6N01SS-T5 Aluminum Alloy | Extrusion Size – Width (A)(mm)(mm) | 80 |
| Extrusion Size – Thickness (T)(mm)(mm) | 80 |
8 Series 80×80 Aluminum Extrusion
Powder coating has many advantages, among which:
1. The degree of pollution to water and air is reduced, and caustic soda, sulfuric acid and other liquid organic solvents are no longer used, reducing water and air pollution, and effectively improving the competitiveness of aluminum profiles and plastic steel profiles as environmentally friendly products. Reduced some production costs;
2. The labor intensity of workers has been significantly reduced. Due to the use of automated assembly line operations, the feeding method and the use of fixtures have been significantly simplified, which improves production efficiency and reduces labor intensity;
3. The surface quality requirements of the wool have been significantly reduced. The powder coating can completely cover the extrusion lines on the surface of the profile, conceal some of the defects on the surface of the aluminum profile, and improve the surface quality of the finished aluminum profile;
4. Compared with other surface treatment films, some physical indicators of the coating film are significantly improved, such as hardness and wear resistance, which can effectively extend the service life of aluminum profiles.
Powder spraying uses powder coatings. Electrostatic spraying is used in the process. The friction spray gun is used to make the powder particles carry a positive charge when they are sprayed from the gun body and contact the negatively charged profile. Electrostatic adsorption, then high temperature curing. It also enhances the adsorption strength of the paint and prevents the paint film from falling off.
From the perspective of the process itself, it has a fairly high technological composition, and the deployment of paints of different colors to produce decorative effects of different colors is more in line with the needs of interior decoration, and it is also in line with the trend of aluminum profiles in the construction industry to develop indoors. Consistent. In particular, the combined use of sprayed profiles and thermally insulated bridges makes it more fashionable and makes powder sprayed profiles have more room for development, which can not be replaced by profiles produced by other processing methods.
